■恒速控制

    由于采用恒轉速控制技術，即使在電網電壓頻繁波動和負載葉片變換的情況下，電機轉速基本保持不變，確保正常工作，避免由于轉速波動產生的噪音 。                  

Constant speed control

    Due to the constant speed control technology, even in the grid voltage fluctuation and load blade transform case, motor speed remained basically unchanged, to ensure the normal work, avoid the speed fluctuation noise .   

■可控反轉

    通過此特性，可以自己決定反轉的時間和持續時間。利用該功能啟動電機反轉進行冷凝器除塵工作。

Reverse on demand

  Through this feature, you can decide to reverse the time and duration. Use this function to start the motor to reverse the condenser dust removal work.

■3檔轉速

    設定高中低3檔轉速，可以直接替換交流電機，節省電機運行的電費和二氧化碳的排放。

Three speeds

 Set the high middle low Three speed, you can directly replace the AC motor, motor run to save electricity and carbon dioxide emissions.

■0～10V無級調速

    0～10V 無級調速電機，可以通過0～10V控制信號進行無級調速，從而實現對控制系統的智能控制，達到更好的節能效果。

0 ~ 10V dc Full speed control

  0~10V step-less speed regulation motor, can be through 0 ~ 10V control signal step-less speed regulation, so as to realize the intelligent control of the control system, to achieve a better energy saving effect.